Superglass Party Wall Roll
From £59.66 Excl. VAT
Superglass Party Wall Roll is a lightweight, non-combustible glass mineral wool insulation roll. The flexible roll is cut at 3x455mm widths to fit between standard wall ties spacings and to allow easy installation and minimum on-site cutting and waste. Manufactured at a minimum density of 18kg/m³.
Application
Superglass Party Wall Roll is designed to provide thermal and acoustic insulation and help provide a zero u-value within masonry party or separating walls as described within Approved Document L1A (England & Wales, Technical Handbook Section 6 (Scotland) and Technical Booklet G (Northern Ireland).
Party Wall Roll may be used as a component in a number of Robust Details Solutions including proprietary systems E-WM-22, E-WM-23 & E-WM-27 (England, Wales & N.Ireland) and V-WM-27 (Scotland). It may also be used in party wall systems which require on-site pre-completion (England, Wales & N.Ireland) or post-completion (Scotland) acoustic testing.
Meets the requirements to deliver a zero U-value for party walls as defined in Building Regulations.
- Description
- Additional information
- Reviews (0)
- Downloads
Description
Density
Manufactured at a nominal density of 18kg/m³.
Thermal Performance
Thermal conductivity of 0.036W/mK.
Fire Performance
All Superglass products are deemed non-combustible and have a fire classification of A1 (the highest possible rating) when tested to BS EN 13501-1 Reaction to Fire.
Environment
- Manufactured in accordance with ISO 14001 – Environmental Management Systems.
- Contains no ozone-depleting substances or greenhouse gases.
- Generic BRE Green Guide Rating of A+.
- BRE Global verified Environmental Product Declaration (EPD)
Recycled Content
Manufactured from up to 84% recycled glass which would otherwise go to landfill.
Standards
Manufactured in accordance with:
- BS EN 13162 Thermal insulation products for buildings – Factory made mineral wool (MW) products.
- BS EN 13172 Thermal insulation products – Evaluation of conformity.
- BS EN ISO 9001 Quality Management Systems (QMS).
- UKCA and CE Marked to BS EN 13162:2012+A1:2015.
Handling & Storage
All Superglass products are easy to handle, cut and install. The products are supplied compression packed in polythene to provide short term protection only. For long term protection, the product must be stored indoors, or under a waterproof covering and off the ground to protect from weather damage. The products should not be left permanently exposed to the elements.
Additional information
| Thickness | 100mm, 125mm, 150mm |
|---|
Reviews
There are no reviews yet.